Vermeer Compatible "Hardfaced Steep Taper Bit"-STH

Our “Hard-faced Steep Taper Bit” is an economical design for use in sand, sandy loams and sticky clays with cobbles. These bits are manufactured from heat-treated, abrasive resistant, alloy steel with a tensile strength of 180,000 psi. The leading cutting edges, sides and faces are impregnated with carbide rubble hard-facing.

For sand, sandy loams and sticky clays with cobbles.

  • 7-Hole Vermeer -- 1/2" x 13, 3.5" Width, 3/4" Thick - DH-06-P7-35-STH

    7-Hole Vermeer — 1/2″ x 13, 3.5″ Width, 3/4″ Thick – DH-06-P7-35-STH

    $155.95     Add to cart
  • 7-Hole Vermeer -- 1/2" x 13, 4.0" Width, 3/4" Thick - DH-06-P7-40-STH

    7-Hole Vermeer — 1/2″ x 13, 4.0″ Width, 3/4″ Thick – DH-06-P7-40-STH

    $170.00     Add to cart
  • 7-Hole Vermeer -- 1/2" x 13, 4.5" Width, 3/4" Thick - DH-06-P7-45-STH

    7-Hole Vermeer — 1/2″ x 13, 4.5″ Width, 3/4″ Thick – DH-06-P7-45-STH

    $178.23     Add to cart
  • 7-Hole Vermeer -- 1/2" x 13, 5.0" Width, 3/4" Thick - DH-06-P7-50-STH

    7-Hole Vermeer — 1/2″ x 13, 5.0″ Width, 3/4″ Thick – DH-06-P7-50-STH

    $195.00     Add to cart
  • 7-Hole Vermeer -- 1/2" x 13, 6.0" Width, 3/4" Thick - DH-06-P7-60-STH

    7-Hole Vermeer — 1/2″ x 13, 6.0″ Width, 3/4″ Thick – DH-06-P7-60-STH

    $250.00     Add to cart
  • 7-Hole Vermeer -- 5/8" x 11, 5.0" Width, 1" Thick - DH-08-P8-50-STH

    7-Hole Vermeer — 5/8″ x 11, 5.0″ Width, 1″ Thick – DH-08-P8-50-STH

    $225.00     Add to cart
  • 7-Hole Vermeer -- 5/8" x 11, 6.0" Width, 1" Thick - DH-08-P8-60-STH

    7-Hole Vermeer — 5/8″ x 11, 6.0″ Width, 1″ Thick – DH-08-P8-60-STH

    $265.00     Add to cart
  • 7-Hole Vermeer -- 1/2" x 13, 3.5" Width, 3/4" Thick - DH-06-P7-35-STH

    7-Hole Vermeer — 5/8″ x 11, 8.0″ Width, 1″ Thick – DH-08-P8-80-STH

    $365.00     Add to cart
Copyright 2026 Terra-Bore All Rights Reserved Created and Designed by VisionLine Media